Licensed gas fitters in Calgary
Gas fitter in Calgary for gas lines, appliances, and BBQ hookups
Gas work has to be done by a licensed gas fitter, to code, with a permit when one is required. ER Plumbing & Heating installs and repairs gas lines and connects gas appliances for Calgary homes and light commercial properties, from a new range or dryer to a natural gas line for the backyard BBQ.
Smell gas? Leave the building right away without touching any switches, then call 911 and your gas utility from outside. Call us once everyone is safe.
What we do
Gas fitting services we offer in Calgary
Gas line installation
New gas lines and extensions for appliances, renovations, and additions, sized for the load they need to carry.
BBQ and outdoor gas lines
A permanent natural gas line to your BBQ or other outdoor gas appliance, with a proper shut-off at the connection.
Appliance hookups
Gas connections for ranges, dryers, fireplaces, water heaters, and furnaces, tested for leaks before we leave.
Gas line repair
Damaged or leaking gas lines repaired or replaced, with the piping pressure-tested afterwards.
Relocations and upgrades
Moving a gas line for a kitchen renovation, or upsizing a line when you add appliances to it.
Light commercial gas work
Gas fitting for small commercial spaces, like the work on our commercial bakery project.
Gas safety
Signs of a gas leak and what to do
Natural gas has an odour added so leaks can be noticed. Take any of these signs seriously.
Warning signs
- A rotten-egg or sulphur smell indoors or near the meter
- A hissing or whistling sound near a gas line or appliance
- Dead or discoloured grass along a buried outdoor gas line
- A pilot light that keeps going out
- A carbon monoxide alarm sounding
What to do
- Leave the building immediately; do not turn lights or appliances on or off
- Do not use your phone until you are outside
- From outside, call 911 and your gas utility’s emergency line
- Do not go back in until the building has been cleared
- Then call us to locate and repair the problem
Permits and code
Permits, inspections, and code-ready gas work
In Alberta, gas work is regulated, and most new gas lines and appliance installations need a permit and an inspection. We pull the permits the work requires, install to code, and pressure-test new piping before it goes into service.
What affects the cost of gas work
- The length and route of the line, and how much wall or ceiling has to be opened
- The pipe size needed for the appliances the line will feed
- Whether the work is indoors, outdoors, or both
- Permit and inspection requirements for the job
We quote once we have seen the route and know which appliances are going on the line.
Gas work tied to your other systems
Because we also handle furnaces, hot water tanks, and boilers, gas line changes connected to those appliances stay with one team. That means one visit, one permit plan, and no hand-off between trades.
Why a licensed gas fitter
Why hire ER Plumbing & Heating for gas work
Licensed gas fitters
Every gas job is done by a licensed gas fitter. We do not subcontract gas work to unlicensed individuals.
Leak-tested before we leave
New connections are checked for leaks, and new piping is pressure-tested, before the system goes back into service.
Permits handled
We pull the permits the work requires, so the job is documented for inspection, your insurer, and a future sale.
24/7 when it matters
A real technician answers around the clock. If you smell gas, get everyone outside and call 911 first, then call us.
Licensed & insured
Licensed gas fitters serving Calgary for 20+ years
Gas fitting is part of our everyday plumbing and heating work across Calgary and nearby communities, for homes, multi-unit properties, and light commercial spaces.
FAQ
Gas fitting FAQs for Calgary
Do I need a permit for a gas line in Calgary?
Most new gas lines and appliance installations need a permit and an inspection. We pull the permits the work requires.
Can you install a natural gas line for my BBQ?
Yes. We run a dedicated line to the BBQ location with a shut-off valve, then connect the BBQ and test the connection for leaks.
How much does a gas line installation cost?
It depends on the length and route of the line, the pipe size, how much finished space has to be opened, and the permit. We quote once we have seen the job.
What should I do if I smell gas?
Leave the building without touching switches, call 911 and your gas utility from outside, and do not go back in until it has been cleared. Then call us.
Do you connect gas ranges and dryers?
Yes. We connect gas ranges, dryers, fireplaces, water heaters, and furnaces, and test every connection for leaks.
Do you do commercial gas fitting?
Yes, for light commercial spaces. Our bakery project is one example.
Contact
Need a licensed gas fitter in Calgary?
Call 587-777-3164 or send the form below. If you smell gas, leave the building and call 911 first.
What happens next
Step 1
Tell us about the job
The appliance, where it is going, and where your gas meter or nearest gas line is.
Step 2
We plan the route
We look at the run, the pipe size, and the permit, and explain the cost before work begins.
Step 3
Install, test, and inspect
We install to code, pressure-test the line, check every connection, and arrange the inspection.
Request service
- Phone: 587-777-3164
- Email: info@erplumbingnheating.ca
- Service area: Calgary and surrounding communities